 Thin Cut-Offs for Angle Grinders
PFERD » Grinding & Cut-Off Wheels » Thin Cut-Offs for Angle Grinders
PFERD thin wheels cut faster than conventional wheels, leaving a cleaner cut, with minimal burr. Thin cut-off wheels are ideally suited for thin gauge sheet stock, thin walled tubing and small diameter cross sections. Material should always be cut at a right angle to the work piece. Larger work pieces require thicker PFERD cut-off wheels for improved lateral stability.
 |
| Thin Cut-Off Wheels Type 1 |
PFERD manufactures a wide selection of high performance flat (type 1) thin cut-off wheels to suit all needs from low purchase price to highest level of performance attainable.
Usage Tip: - .040 thickness recommended for sheet stock and tube19 gauge and higher
- .045 thickness recommended for 14-18 gauge material
- For larger cross sections, please use 3/32 and larger cut-off wheels for performance and safety.
|
| |
• |
General Purpose for Steel |
| |
• |
High Performance for Stainless |
| |
• |
Premium Performance for Stainless |
| |
• |
Cut-Off Wheel Test Pak -Type 1  |
|
| |
 |
| Thin Cut-Off Wheels Type 27 |
PFERD manufactures a wide selection of high performance depressed center (type 27) thin cut-off wheels to suit all needs from low purchase price to highest level of performance attainable.
Usage Tip: - .040 thickness recommended for sheet stock and tube19 gauge and higher
- .045 thickness recommended for 14-18 gauge material
- For larger cross sections, please use 3/32 and larger cut-off wheels for performance and safety.
|
| |
• |
.045" High Performance A-SG for Steel |
| |
• |
.045" High Performance A-SG INOX for Stainless |
| |
• |
.030 & .045" Premium Performance A-SGP INOX for Stainless |
| |
• |
Cut-Off Wheel Test Pak -Type 27 |
|
| |
 |
Cut-Off Wheel Test Paks  |
Not sure which performance level is right for your application? Pick up a test pak and put them to the test on your grinder! |
|
| |
|
